| | |
Polar
CS300 Cycling Computer
Manufacturer Code : 90025663
Our Price:
£90.99
RRP: £149.50.
You Save: £58.51
The Polar CS300 - For fitness cyclists who want to wear their training computer on the wrist or on the bike mount.
Body Measurement Features:
CS Cadence Sensor Features:
CS Speed Sensor Features:
Data Transfer:
Recording Features:
Training Features:
Watch Features:
Body Measurement Features:
- Automatic age-based target zone – bpm / %
- Average and maximum heart rate of training
- Heart rate – bpm / %
- HR-based target zones with visual and audible alarm - You can define your target zones for a training session based on heart rate to help define the right intensity. When you are out of the preset zones, the training computer will give a visual and audible alarm.
- HRmax (age-based) - The highest number of heart beats per minute (bpm) during maximum physical exertion. For a rough estimate of your maximum heart rate, subtract your age from 220. HRmax is a useful tool for determining the intensity of training as intensity zones can be defined using HRmax. Some Polar products define maximum heart rate during the Polar Fitness Test, see also HRmax (Polar Fitness Test -based).
- HRmax (Polar Fitness test-based) - Some Polar products predict your HRmax simultaneously with the Polar Fitness Test. This predicted HRmax value is more accurate than the age-based formula (220 minus age).
- HRmax (user set)
- Manual target zone – bpm / %
- Polar Fitness Test - Polar Fitness Test measures your aerobic fitness at rest in just five minutes. The result, Polar OwnIndex, evaluates your maximal oxygen uptake (VO2max). With the Polar Fitness Test you can measure your aerobic fitness by yourself, automatically and without any exertion. All you need is your training computer. The Polar Fitness Test is as accurate in predicting the VO2max as any sub maximal fitness test. The test is based on heart rate and heart rate variability at rest and personal information.
- Polar OwnCal® – calorie expenditure
- Polar OwnCode® (5kHz) – coded transmission - Coded heart rate transmission automatically locks in a code to transmit your heart rate to the training computer. The training computer picks up your heart rate from your transmitter only. Coding prevents interference from other training computers.
- Polar OwnZone® – personal heart rate zone - Polar OwnZone® determines your personal heart rate limits for a training session. Depending on the day and time, your physical state may vary, for instance, if you are stressed or tired, or if you are not fully recovered from your latest training session, Polar can determine that information from your heart rate and guide you to your ideal training zone for that moment.
- Training load – available via polarpersonaltrainer.com - This feature is available in Polar software. When you transfer training results from your training computer to polarpersonaltrainer.com, you can follow your training load and recovery in the training diary. Continuous monitoring of training load and recovery will help you recognize personal limits, avoid over- or undertraining, and adjust training intensity and duration according to your daily and weekly targets
CS Cadence Sensor Features:
- Bike settings – for two bicycles - You can define settings up to two to three bikes in your training computer. When you start training, you can select the bike with the correct settings for that particular training session.
- Cadence – current, average and maximum - Your cycling cadence stands for your pedaling rate in revolutions per minute (rpm). Cadence is the central factor in improving cycling performance. A higher cadence reduces the force needed for each pedal stroke, and thus improves overall performance. Running cadence measures how many times your either right or left foot hits the ground in one minute. Running cadence is measured as steps per minute. With this feature you can sharpen your cadence and make your ground contact time shorter. This will help you to find a balance between leg power and leg speed.
- Cadence-based target zones with visual and audible alarm - You can define your target zones for a training session based on cadence. When you are out of the preset zones, the training computer will inform you with a visual and audible alarm.
CS Speed Sensor Features:
- Autostart/stop - By activating Autostart/autostop feature, the cycling computer starts and stops training recording automatically when you start or stop pedaling.
- Bike settings – for two bicycles - You can define settings up to two to three bikes in your training computer. When you start training, you can select the bike with the correct settings for that particular training session.
- Distance – training, lap, and total - Distance (km, mi) can be set and measured in several ways. Training distance tells you the distance traveled during a training session. Trip distance tells you the distance from the latest trip reset. Lap distance tells you the distance of one lap. Total distance is the distance accumulated since the last reset. Odometer tells you the cumulative distance which you cannot reset.
- Speed – current, average and maximum - Speed (km/h or mi/h) is measured with GPS, footpod, stride sensor or cycling speed sensor.
Data Transfer:
- Edit wrist unit settings with Polar UpLink Tool and transfer them to your Polar product (UpLink)
- polarpersonaltrainer.com compatible with SonicLink and WebLink
Recording Features:
- Totals - Totals includes your training data starting from the last reset enabling you to follow your long-term training.
- Training files (with summaries) – 14
- Weekly History - Weekly history gathers your weekly training data. By selecting a week, you can review your training data for the week.
Training Features:
- Automatic display scroll - Automatic display scroll enables you to alternate between displays automatically during training without a need to remove hands from handle bars. Activating automatic display scroll improves riding safety and comfort.
- Graphical comparison of two values - This feature enables comparison of two values as graphs during training. For example, you can choose a graphical overview of your heart rate and altitude to see how altitude affects the intensity of your training .
- HeartTouch – button-free operation of wrist unit - When HeartTouch is on, different training information during training can be accessed without pressing buttons, for instance, when gloves make pressing buttons difficult, by bringing your training computer close to your transmitter.
- User configurable displays - This feature allows you to configure training computer displays to show the information that you need during your training session. Configure the displays either in the training computer or in ProTrainer 5 software.
- ZonePointer - ZonePointer is a visible and moving symbol on the training computer display indicating whether you are inside the pre-set target zone. This feature helps you to reach the desired intensity/pace/speed/cadence targets.
Watch Features:
- Backlight
- Date and weekday indicator
- Display text in English, German, French, Spanish, and Italian
- Dual time zone
- Low battery indicator
- Time of day (12/24h) with alarm and snooze
- Training reminder
- Water resistant – 50m
